THE IDEAL TOOL FOR OPTIMAL SOIL AND SEEDBED FIRMING. THE ROLLERWARRIOR® IS SPECIFICALLY DESIGNED AS PART OF THE COMPLETE SOILWARRIOR® SYSTEM FOR ZONE TILLAGE, DELIVERING IDEAL SOIL AND SEEDBED FIRMING CAPABILITY. WITH A UNIQUE AND FLEXIBLE DESIGN, THE ROLLERWARRIOR® HELPS TO IMPROVE SEED-TO-SOIL CONTACT AND GERMINATION TO BENEFIT YIELD POTENTIAL. THE ROLLERWARRIOR® IS BUILT TO THE SAME EXACTING, CONSTRUCTION-GRADE SPECIFICATIONS AS THE SOILWARRIOR®. EACH ROLLER UNIT IS CONTROLLED BY AIR DOWN PRESSURE – NO MECHANICAL SPRINGS – WHICH YOU CAN EASILY ADJUST FROM THE COMFORT OF YOUR CAB. ROLLER UNITS ARE MOUNTED ON SEPARATE, INDEPENDENT PARALLEL LINKAGES ATTACHED TO A SINGLE PIVOT POINT, SO YOU CAN FOLLOW ALL THE CONTOURS OF YOUR FIELD WITHOUT WORRYING ABOUT TOO MUCH OR TOO LITTLE COMPRESSION.
THIS IS YOUR DAY
Each section moves independently to keep a consistent and even pressure in any field condition.
13″ ROLLER DIAMETER
Delivers more effective weight transfer with less ballast.
3/8″ THICK ROLLER WALL
Resists damage even in the toughest field conditions.
BOX PARALLEL LINKS
Tough, durable, 1-1/4″ case-hardened pivot pins handle the forces of hard field work and allow equal pressure through the 18″ of vertical travel.
Regulates the downward pressure on each section with a unique air spring design, all from the comfort of your cab.
Assures a long-life span. And the innovative 1-1/2″ assembly system makes service or replacement as easy as removing a few bolts.
BOLSTER ROLLER MOUNT
Adjusts to the contour of the field without over compressing the high spot in the roller width, the roller can flex in the needed direction over a short distance.
NO SPEED LIMIT
The unique combination of air springs, bolster mounts, and parallel links take the bounce out of the roller, removing the speed limit normally associated with roller units. Cover more acres per hour and minimize fuel cost.
INCREASED YIELD POTENTIAL
Compact small stones into the soil before planting to create a level field surface that allows for the closest cut possible in crops like soybeans. Maximize yield potential by improving seed-to-soil contact and increase the germination potential.
Eliminate crop damage, ruts, or roller unit complications on sharp turns by raising the unit in tight corners.
RollerWarrior® units mounted on an ETS toolbar configuration can fold to a 14ft. transport width, allowing you to safely transport the system from field to field.
42′ at 11,000 lb
While RollerWarrior® units can be mounted on any existing 7×7 inch toolbar with proper strength specifications, we recommend mounting the RollerWarrior® units on the standard ETS Cart with a weight bracket and ballast. The Standard ETS Cart boasts 3-3/8″ spindles using a 10-bolt heavy hub, a 14′ transport width and 385/65R22.5 or 425/65R22.5 truck tires to carry the load and handle the road